Sunday, April 5, 2009

the beauty of a radio


So on Friday before I went to sleep, I turned on the radio like I always do. Right before this I was attempting to be a good student and "study" for the ACT. But studying actually meant a very fast skim of the practice book that I got from the CCO. Anyways the last section was the science section. There was some chemistry and some biology but there was also physics. In the practice book, there was problems on circuits and stuff we just learned. So I closed my book and turned off the light and went to my bed. I was still thinking about physics in general because that was the last thing I was thinking of. So I go to turn on my radio and I realize that it has more than one physics topic in the way it works. Magnets and sound waves! (btw this isn't a picture of it when I realized there was physics in it...I just went to sleep that night =P) Anyways, I turn my radio on and "gimme love" is playing I think on 100.3 So I turn the volume up because I like that song a lot. By adjusting the volume, I change the amplitude of the wave because the louder I make it, the bigger the amplitude. But the frequency, and period of the wave stays the same. But the next song that came on I didn't really like so I remember changing it to 98.5 but that was on commercial so I put the station on 102.7. By changing stations, my radio was catching different waves with different frequencies. This is why the music changed. The second part I realized was the speakers. They work by using a permanent magnet and electro magnet. The flow of electricity is switched depending on the music and so therefore the poles of the electromagnet is switched. When this happens, the permanent magnet and electromagnet either attract or repel depending on the poles. This vibration causes the speakers to create sound waves with a certain frequency. So with high notes it just vibrates faster or the poles switch faster. I think it is so awesome that something that I use everyday can be so related to physics!

Tuesday, March 3, 2009

Magnets =]


While I was doing my homework, I got thirsty and decided to go get a drink from the refrigerator. When I went to the frig, I looked at all the magnets that we have and all the pictures that the magnets hold up. There are magnets from all over because our family likes to collect magnets. I realized that this is related to physics. A refrigerator is made from iron, which means it is ferromagnetic. Because iron and nickle and cobalt all have an unpaired electron, that electron's spin isn't offset by another electron going in the opposite direction. This causes magnetism. The magnet is already magnetic meaning that all its unpaired electrons are spinning the same way. This creates magnetic north and south poles. The refrigerator has all its unpaired electrons spinning in all different ways. This is why it isn't magnetic. But, when a magnet is put on the refrigerator, it stays because the magnet changes the spin of the electrons on that part of the refrigerator, which creates north and south poles. If I tried to stick some other ferromagnetic object that wasn't magnetized, it wouldn't stick because just like the refrigerator, its electrons would be spinning in random directions and the domains would be pointing in different directions. So it wouldn't have poles to reorient the domains in the refrigerator. Something so simple that I always overlook has such interesting physics ideas in it.

Monday, February 16, 2009

A Bright Idea



This weekend we had a party at my house and we were cleaning the house and getting ready. One of the light bulbs needed to be replaced so we went to the store and got 60 watt light bulbs. After we replaced the light bulb, we turned it on and it seemed like in an instant it was bright. What is actually happening is that there are electrons all along the circuit and in the light bulb. When I flipped the switch on, it made a complete circuit. This connects the two voltage differences, which is what forces the electrons through the circuit. At the instant there was an electric field, the electrons started moving through the light bulb and through the filament. The filament is what makes the light bulb light. The filament is made out of tungsten, which is the metal with the highest boiling point. A long piece of filament is coiled into a small area. As the electrons move through the filament, they bump into the atoms, which is resistance. This colliding between electrons and atoms cause heat energy. The heat energy is turned into light energy and a light bulb lights. This seemingly easy invention was actually a really bright idea.

Monday, February 2, 2009

outlets





Today after I went to karaoke with my family, I went to the bathroom to go take a shower. I pushed the power button but the radio didn't turn on. Then I realized that it wasn't plugged in and I felt like an idiot. So I plugged it in and realized that there was physics in the outlet. The average house outlet has 120 volts. Actually the difference in voltage between the two points of an outlet is 120 V. The outlet has three holes. Two of them make a complete circuit, which is why there is power when I plugged the radio in. The third hole is to keeps it grounded so that it doesn't short circuit. But it made me think of those caution signs. Like the ones on power plants and stuff that say danger high voltage. When I was little I used to think that it was super dangerous and that if i just touched it I would get shocked. But volts is actually a ratio of potential energy and charge. The more potential energy per coulomb, the more dangerous it is. But now I know better =] I never realized there could be so much physics in such an everyday household item like an outlet.

Monday, January 26, 2009

the cup




This weekend was my grandpa's 83 birthday. It was actually on friday but we celebrated it on sunday. I went to my cousin JR's house and we had a small party with the family. We ate lots of food, sang happy birthday and ate the cake and ice cream. When I was eating, I was drinking water in a green cup. Some of my cousins and uncles and aunties were watching this show man vs. food. Some of the stuff he ate was so big and greasy looking. After they showed one of the foods, my family reacted to it and all said "eew". I wanted to see what they were so grossed out about. So, without thinking, I put my cup down on the table and hurried to the tv room. But as I started running, I heard my cup fall on the floor. The reason why it fell can easily be explained by physics. In the first picture, the center of mass is supported by the table. But my cup's center of mass wasn't causing it to fall on the floor. The weight of the cup creates a downward force. When it is supported, then there is no lever arm so it can't exert a torque and fall over. But when the cm isn't supported, the lever arm is from the edge of the table to the cm and there is a torque which causes the cup to rotate over. Next time, I need to pay attention and make sure the cm of my cup is fully supported by the table :)

Sunday, January 4, 2009

Christmas time =]


During winter break, we got a tree and decorated it with ornaments and lights. While I was putting the ornaments on, I accidentally hit the tree and one of the ornaments fell. These ornaments were my grandma's and they are really old and fragile. Luckily our tree is on a carpeted area so when the ornament fell, it didn't break. But if the ornament had fell on the hard floor, it would have shattered into pieces. I realized that this was totally related to physics. When a net force is applied to an object to change its velocity and momentum, then it is an impulse (J). In physics, there is a formula for impulse J = F x t (impulse= force x time). Impulse also equals change of momentum. The change of momentum of the ornament would be the same on the hard floor and the carpet because the mass is the same and the change in velocity would be the same. The reason why the ornament didn't break was because the time of impact was extended therefore decreasing the force. The carpet was a cushion that increased the time it took for the ornament's velocity to reach zero. Thanks to physics, my grandma's ornament didn't break.

Sunday, December 14, 2008

Bend it like Beckahm


Two summers ago I went on a soccer trip. I played in Pats Cup and Surf Cup. Between those two tournaments, our team went to go watch Galaxy play against DC United. It was a really fun game and we were able to see Beckham play for a little bit. He took a free kick from outside the box and he bent it into the goal. He put so much spin on the ball and it had a mean curve. He applied a torque to the ball, which caused it to rotate. The way he did it is by kicking the side of the ball with enough force to get it to rotate and go forward at the same time. The point of rotation is the center of the ball or the center of mass. The lever arm, the distance from the point of rotation to the point where the force is applied, is the radius of the ball. I always wondered how Beckham got so much rotation in the ball and the answer is in physics. There are three ways to maximize torque. 1)increase the force applied, 2)increase the lever arm distance, and 3)make sure the force is perpendicular to the lever arm. Since the lever arm can't increase, then the two ways Beckham puts so much torque on the ball is having a lot of force and kicking perpendicular to the radius of the ball. It is cool how physics applies to things like soccer and curving a ball.