Monday, January 26, 2009

the cup




This weekend was my grandpa's 83 birthday. It was actually on friday but we celebrated it on sunday. I went to my cousin JR's house and we had a small party with the family. We ate lots of food, sang happy birthday and ate the cake and ice cream. When I was eating, I was drinking water in a green cup. Some of my cousins and uncles and aunties were watching this show man vs. food. Some of the stuff he ate was so big and greasy looking. After they showed one of the foods, my family reacted to it and all said "eew". I wanted to see what they were so grossed out about. So, without thinking, I put my cup down on the table and hurried to the tv room. But as I started running, I heard my cup fall on the floor. The reason why it fell can easily be explained by physics. In the first picture, the center of mass is supported by the table. But my cup's center of mass wasn't causing it to fall on the floor. The weight of the cup creates a downward force. When it is supported, then there is no lever arm so it can't exert a torque and fall over. But when the cm isn't supported, the lever arm is from the edge of the table to the cm and there is a torque which causes the cup to rotate over. Next time, I need to pay attention and make sure the cm of my cup is fully supported by the table :)

Sunday, January 4, 2009

Christmas time =]


During winter break, we got a tree and decorated it with ornaments and lights. While I was putting the ornaments on, I accidentally hit the tree and one of the ornaments fell. These ornaments were my grandma's and they are really old and fragile. Luckily our tree is on a carpeted area so when the ornament fell, it didn't break. But if the ornament had fell on the hard floor, it would have shattered into pieces. I realized that this was totally related to physics. When a net force is applied to an object to change its velocity and momentum, then it is an impulse (J). In physics, there is a formula for impulse J = F x t (impulse= force x time). Impulse also equals change of momentum. The change of momentum of the ornament would be the same on the hard floor and the carpet because the mass is the same and the change in velocity would be the same. The reason why the ornament didn't break was because the time of impact was extended therefore decreasing the force. The carpet was a cushion that increased the time it took for the ornament's velocity to reach zero. Thanks to physics, my grandma's ornament didn't break.

Sunday, December 14, 2008

Bend it like Beckahm


Two summers ago I went on a soccer trip. I played in Pats Cup and Surf Cup. Between those two tournaments, our team went to go watch Galaxy play against DC United. It was a really fun game and we were able to see Beckham play for a little bit. He took a free kick from outside the box and he bent it into the goal. He put so much spin on the ball and it had a mean curve. He applied a torque to the ball, which caused it to rotate. The way he did it is by kicking the side of the ball with enough force to get it to rotate and go forward at the same time. The point of rotation is the center of the ball or the center of mass. The lever arm, the distance from the point of rotation to the point where the force is applied, is the radius of the ball. I always wondered how Beckham got so much rotation in the ball and the answer is in physics. There are three ways to maximize torque. 1)increase the force applied, 2)increase the lever arm distance, and 3)make sure the force is perpendicular to the lever arm. Since the lever arm can't increase, then the two ways Beckham puts so much torque on the ball is having a lot of force and kicking perpendicular to the radius of the ball. It is cool how physics applies to things like soccer and curving a ball.

Saturday, November 22, 2008

surfing!



Last weekend, I went to the beach with my cousins JR and Nick. We went to Ali'i beach in the North Shore and we swam and ate huli huli chicken. There was the big surf tournament there but that day it was canceled so we didn't get to watch it. But there were many people out in the water surfing. I thought that there has to be physics involved in this.
From Newton's 1st law we know that things always wants to keep on doing what it's already doing. This means that the wave will want to keep on moving and if a surfer is just sitting on a board, the board will just want to keep on staying still. When you see people surf, they have to paddle in order to catch the wave. This is because they have to match the speed in order to catch it. But for the big waves that are moving very fast, it is impossible for a surfer to match the speed of the wave just by paddling. So lucky for those big wave surfers, there is concervation of energy, which means Potential Energy can be converted into Kinetic Energy. "Dropping in" does just that. A surfer has to paddle (or sometimes, with the big waves, get towed in) in order to gain some speed so the wave doesn't pass right under them. This initial speed halps the board and the surfer to fall down the face of the wave or "drop in". The Potential Energy they had at the top of the wave is now converted into Kinetic energy as they go down it.
( KE top + PE top = KE bottom)

This gives a surfer the speed needed to match the wave's and catch it. There is physics in something as simple and as fun as surfing.

Sunday, November 2, 2008

friction is fun!!!




This past Thursday, I was riding home from school with JR and his sister Ashley. It was drizzling so the traffic was bumper to bumper right by Red Hill. So we get past the hill and we are already by the flat part when the person in front of us suddenly stops. JR is paying attention and he stops and one second later, boom! Ashley hits her head on my headrest and JR's knee hits all the buttons so all of the lights on the dashboard comes out. JR's car isn't that bad but the guy's in the back is totaled. He can't even get out of the car and his hood is folded together and bent like a roof. He said that he was going slow and that he tried to break but he skidded.
I realized that there was physics in this excuse. It had to do with friction! This couldn't have been what actually happened because the tires and the road have a certain maximum friction. He said he was going slow but this can't be possible if he slid. The car has to be going a certain speed so that when he stops, the force forward surpasses the friction of the tires and the road. Also he had to have been going fast if he hit us that hard and his car was in that bad shape. There was also another problem with his excuse. He said that he hit his breaks and skidded. But, the car was a more recent model, which means that it should have anti-lock breaks. Even more so, he would have to have been going faster because there is static friction between the tires and the road and not kinetic friction. Static friction has a higher maximum meaning he would have had to be going faster if he didn't have enough time to stop. Either that or he just wasn't paying attention and hit us. It was cool to be able to prove that someone was lying just because of a simple thing like friction.

Monday, October 20, 2008

just like glasses



Physics is very fun and I really enjoy everything we do in class. The concepts relate to real life and things all around me, which makes it easier to understand. It is cool to see how things work and why things happen the way they do sometimes. Just a simple thing like gravity is very important it everyday life. I like the labs a lot because it further explains what we are learning about. I also like the demonstrations like the one where the two ball berrings landed at the same time even though one was launched horizontally and one was just dropped. My anxiety about this class is not being able to understand a certain concept or section and getting totally lost. Other than that I am excited about the other things we will get to do in this class. I think I have been trying hard in this class. I do all my homework and I study for tests and quizzes. I think I need to ask for help more when I don't understand something so that I will be able to get it.
This course is like a pair of glasses for me. Before this, I didn't really realize that many things around me were as facinating as they are. But now things that seemed just ordinary and everyday things are a lot more interesting. There is actually a reason to why a ball moves when I kick it. When I hit someone who is bigger then me, I bounce the other way because of Newton's third law. Glasses make things a lot more clear and helps people to notice what they didn't before. That is how physics is for me. I am able to see what I think is simple and put reasoning behind it and enjoy it more.

Sunday, October 5, 2008

distance vs displacement



This weekend my whole family from my dad's side went to Maui. It was my Aunty Renee's birthday so the our parents planned to go and celebrate it on another island. It was really fun because all of my cousins were there and there were four pools with slides, caves, pool-vollyball and pool-basketball. We left on Friday after school and came back on Sunday. I noticed that there was physics in our trip that shows the difference between distance and displacement. Distance just measures the amount traveled. Displacement measures the amount traveled and in what direction. Displacement is the net change in position. The total distance and displacement that our family flew on the plane were different. The distance from Oahu to Maui is around 116.47 miles. So the total distance that we traveled on the airplane was around 232.94 miles, which is to and from Maui. But our displacement was zero. Even though we traveled 116.47 miles in one direction, we traveled that same distance in the opposite direction, making our total displacement zero. Our trip to Maui showed the difference between distance and displacement and how they measue different things.